Panasonic SC-DV100 - Manual (Page 42)

I
wt
C
s
o
&
O)
c
t
o
Kt
«
Recording from radio broadcasts
.J
Preparations:
® Press Standby/on switch to turn the unit on,
© The ieader tape must be wound on beforehand. page 39)
® insert the tape to be recorded on into deck
2 .
For your reference
Frequency displays are different according to the area.
The example in the figure is for U.S.A. and Canada.
To record in Dolby B NR:
Press [DOLBY NR] and check NR” is dis­
played.
Press [REV MODE] to seiect the reverse mode.
X: One side will record, then recording will stop
automatically.
c:^y. Both sides will record (forward side^reverse side),
then recording will stop automatically.
Tune in the desired station.
page 16)
Press [• REC PAUSE] to put the deck into the
recording standby mode.
The playback indicators or “[>" will start flashing.
If you select in step Q, the direction will automatically
change to when you press [• REC PAUSE].
Press [<] or [[>] to start recording.
O: To begin recording from the forward side.
<; To begin recording from the reverse side,
To stop recording
Press {■].
To cut an unnecessary part while recording
(T) Press [• REC PAUSE].
The cassette deck will go into the recording standby mode.
© To resume recording, press [<] or [>], whichever playback indi­
cator is flashing.
To display the tape counter while recording
Press (COUNTER DISPLAY].
The tape counter will be displayed for approximately 5 seconds.
ROT5056