Panasonic SC-CH33 - Manual (Page 59)

irechnical Specifications
Amplifier section
1 kHz continuous power output both
channels driven 2x30 W (THD1 %, 6Q)
Total harmonic distortion half power at 1 kHz 0.07% (60)
Frequency response
AUX 30 Hz-30 kHz (-3dB)
Input sensitivity
AUX 250 mV
Input impedance
AUX 24 kO
Graphic equalizer ±10 dB
(100 Hz. 330 Hz, 1 kHz, 3.3 kHz, 10 kHz)
■ FM tuner section
Frequency range
Sensitivity
Total harmonic distortion
MONO
STEREO
S/N
MONO
Frequency response
Image rejection at 96 MHz
Stereo separation
1 kHz
Antenna terminals
■ LW/MW tuner section
Frequency range
87.50-108.00 MHz
23.3 dBf (4.0 m V, IHF’ 58)
0.3%
0.5%
65 dB (70 dB, IHF)
30 Hz-15 kHz (+0.5 dB, -2 dB)
40 dB
35 dB
750 (unbalanced)
MW 622-1611 kHz
LW 144-288 kHz
Sensitivity (for 500 mW)
MW (at 999 kHz) 250 pV/m
LW (at 252 kHz) 350 pV/m
■ Cassette deck section
Track system 4-track, 2-channel
Heads
Playback Solid permalloy
Record/Playback Solid permalloy
Erasure Double gap ferrite head
Motor DC servo motor
Recording system AC bias, 100 kHz
Erase system AC erase, 100 kHz
Tape speed 4.8 cm/sec
^Frequency response
, NORMAL
40 Hz-14 kHz (+3, -6dB)
CrOi 40 Hz-14 kHz (+3, -6dB)
¡¡¡iiM 1 Dolby NR off
52 dB (A-\WTD)
KjDolby NR on 61 dB (CCIR)
piiQw and Flutter 0.1% (WRMS)
[ forward and rewind time
Approx. 110 seconds with C-60 cassette tape
CD piayer section
ipling frequency
iing
I Source/wave iength
iber of channels
luency response
Ratio
^Wow and Flutter
lal filter
iismt converter
44.1 kHz
16-bit linear
Semiconductor laser/780 nm
2-channel, Stereo
20 Hz-20 kHz(+1, -2dB)
90 dB Filter (JIS. A)
Below measurable limit
4 times over sampling
Multi-stage noise shaping
■ Speaker system
Type
Speaker(s)
Impedance
Input power
For area except United Kingdom
Output sound pressure level
Cross over frequency
Frequency range
Dimensions (WxHxD)
Weight
■ General
Power consumption
Power supply
Dimensions (WxHxD)
Weight
: way, 3 speakers bass-reflex
Woofer 14 cm cone type
Tweeter 6 cm cone type
Super tweeter piezo type
60
80 W (music)
250 W (peak input)
87 dB/W(1.0 m)
2.8 kHz, 10 kHz
48 Hz-22 kHz(-16dB)
180x 319 x257 mm
3.5 kg
123 W
AC 50 Hz, 230-240 V
215x319x338 mm
7.7 kg
Notes:
1. Specifications are subject to change without notice.
Weight and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
This apparatus was produced to BS 800.
59