Panasonic SC-CH33 - Manual (Page 39)

8 Press SET.
•The system assigns tracks to both sides of the tape and
displays the results.
•The time remaining on both sides of the tape appears on the
display.
The time remaining on the tape side A
1 The time remaining on the tape side B
“/■
f.
/ / 1 1
~r u
/_-
1
/ 1
1 DECK 2 ¡ MAX"
1 EDIT 1 ZD M)N
VOL LIME 1 SIDE AS 11 QJ d) m E] CD S E [S CD ® ED o e*|
Tracks to be recorded on both sides
To confirm the time remaining and the tracks to be recorded
on tape side A, press CD EDIT. Each time you press this
button, the display will change as follows:
1. The time remaining and the tracks to be recorded on tape
side A
2. The time remaining and the tracks to be recorded on tape
side B
3. The time remaining and the tracks to be recorded on both
sides of the tape
9
Press the CD play button for automatic re­
cording.
The recording will start after the following steps.
1. The cassette deck starts to rewind the tape to the begin­
ning.
2. The cassette deck fonvards the tape making a non-record-
ed passage of about 10 seconds and stops to enter the
recording standby mode.
3. The compact disc player automatically scans for the peak
(highest) level of the entire disc (ATLS; see right.) and then
recording will start.
r T?
/_ ± 1
r r n
/_/• U
l.£PIT I ,V1.S
laoEA [D El [U H) Q]
I DECK 2 I “AX'
► -I ZD ESI
^ M(N *s
VOLUME
When edit-recording has finished, the cassette deck automati­
cally enters the recording standby mode,
;rlf you want to change something you have set, or if an error has
occurred, press the cancel button.
The system will return to the previous setting mode.
■ About Automatic Tape Level Setting (ATLS)
Since compact discs generally have a wide dynamic range, care­
fully setting of the record level is required to achieve the best
recording results.
This system automatically scans (fast search) for the peak (highest)
level of the entire disc, and the tape deck set the appropriate
recording level. During this period, the peak level sound will not be
heard.
■ To cancel album edlt-recordlng
(Also available from the remote control.)
Press the CD stop button twice.
d
CLEAR will appear on the display.
39