Panasonic SC-CH33 - Manual (Page 40)

Edit-Recording from Compact Discs
(continued)
Tape length priority recording (FIT EDIT)
When the tape is not long enough to record all the tracks on a
compact disc in their original sequence, it is sometimes possible to
record all the tracks by rearranging their sequence. The built-in
microcomputer calculates whether this is possible and specifies
track sequence.
8
7
I ° I *o o'
1
Press the deck 2 eject button to load a cas­
sette in deck 2.
Check that the tape’s erasure prevention tabs are intact.
When making a Dolby NR recording, press DOLBY NR.
2
Press the CD input select button.
3
Press OPEN/CLOSE on the CD player to load
a disc.
4
Press CD EDIT.
5
Turn the jog dial to select FIT.
The ALBUM, PROGRAM, and FIT displays will appear in
sequence.
6 Press SET.
8 Press SET.
The system assigns the tracks to both sides of the tape and
displays the results.
The time remaining on the tape side A
I The time remaining on the tape side B
j - r “/
n- “/'r
/_/• /1 _/ I DECK 2 I
r: Fit edit-recording display
r
/
r U 1
1 1 1
DECK 1
/_ DECK 2
fEC im
E] d] [S a (s
VOLUME
— Edit indicator
I EDIT I ...... ■=
I_SIDEAB||[H [ I ] [ 3 ] [ i ] [ s ] [ l ] [ T ] [ a ] [ l ] | i e l S i | [ i | | i > | ________________________________________VOLUME
I
Tracks that will fit on both sides
To confirm the time remaining and the tracks to be recorded
on tape side A, press CD EDIT.
Each time you press the button, the display will change as
follows:
1. The time remaining and the tracks to be recorded on tape
side A
2. The time remaining and the tracks to be recorded on tape
side B
3. The time remaining and the tracks to be recorded on both
sides of the tape
7
Turn the jog
dial
to select the length of the
tape you are using.