Panasonic SC-CH33 - Manual (Page 35)

Making a Recording
(Dock 2 only)
To record from the radio or external source
Although you can record a compact disc using the following proce­
dures, we recommend that you use the compact disc edit-recording
procedure to record a compact disc. (See “Edit-Recording from
Compact Discs’’ on pages 38-43.)
To make a tape-to-tape recording, see “Tape-to-Tape Recording”
on page 37.
(Steps 4 and 5 also available from the remote control.)
23 1
Switch on the power.
1
Press the deck 2 eject button to load a cas­
sette in deck 2.
•You cannot record on the leader tape (the first few revolu­
tions) so take up the leader tape in advance.
•You can use normal and chrome tapes for recording.
This deck automaticaliy identifies the kind of tape loaded,
and sets the bias (for recording) and equalization accord­
ingly. (Auto tape selector function)
2
When making a Dolby NR recording, press the
DOLBY NR so that the Dolby NR indicator
appears.
3
Press REVERSE MODE to select the reverse
mode you want to use.
: One side will record, and then the tape will stop
automatically.
c ;: d
Both sides will record (forward side/reverse side)
and then the tape will stop automatically.
Press REC PAUSE to put the cassette deck
into the recording standby mode; then press
the Input select button to select your desired
sound source.
The tape direction indicators will flash to show the direction in
which you can record.
r
r
hfi n
u
n 1 n QUARTZ
1 1 O- 1 u
STEREO
MHz
1 DECK 2 1 M«-
......
liJQLBY NR l| VOLUME
Recording indicator
5
Press one of the playback buttons to start
recording and start playing the source to be
recorded.
I > j : When recording on either the forward side or both
sides.
[ I : When recording only on the reverse side.
Your attention is drawn to the fact that recording pre-re­
corded tapes or discs on other published or broadcast mate­
rial may infringe copyright laws.
35