Programming the home theater remote – Panasonic CT-36SF24 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Programming the Home Theater Remote

The remote control can be set to control other manufacturers components, by utilizing the

MODE SELECTION

BUTTONS

for

CABLE, DSS, VCR, RCVR

Receiver

Amplifier), CD, LD,

and

AUX

(for

Cassette Players, Second

VCR

or a

DVD.)

Code Known

Use the following procedure for setting up the

remote control using the numerical buttons

when the component’s remote code is known.

rn Determine the brand of the component.

in Identify the code(s) associated with the

brand from the infrared code index (see

following pages). Record all possible

codes.

n Confirm that the component is plugged

in and operating properly, then turn it

OFF.

[4Ì

Press and hold the

^3)

button, then

the button so that both are

pressed at the same time for

15 seconds. All Mode buttons wiil

flash.

Then let go of the buttons.

fSl

Press the appropriate Mode button
for the component. The pressed

button will illuminate steadily. All
other buttons will go out.

Code From

Index Sheet

Enter the 3-digit code, by using the

Remote

Control

Keypad

“0”

through ”9” buttons. If a proper

code was entered, the Mode button
will blink twice then go out.

Bvirihe remòte

ITI

Press the button to test the remote. If

the correct code is setup for the

component (in step [Sl)i the component
wiil turn on.

NOTE:

Some brands have multiple codes.

Repeat the procedure using another
listed

code

until

the

component

responds correctly.

Code Unknown

Use the following procedure for setting up the
remote control when the component's remote

access code is not known. This procedure
uses the "sequence method”.

[01

Confirm that the component is plugged

in and operating properly, then turn it

OFF.

Press

and

hold

the

button,

then the button so that both
are pressed at №e same time for at

All Mode buttons

will flash.

Then let go of the buttons.

Press the appropriate Mode button

for the device. The pressed button

will illuminate steadily. All other

buttons will go out.

EUR511060A

Press the button to step

over to the next code.

Press the button to test the
remote. If the correct code is

sent, the component will turn on.

Once the correct code is found,

press the

button

to store the code.

Repeat from step El above until the

proper component code is found. It

may take several attempts before

the correct code is found.

NOTE:

If an incorrect code is entered, or

when

the

operation

not

completed within 30 seconds, the

settings will not change.

Infrared Remote Codes for Specific Components

Helpfut^lnt:, . Write down the code numbers for your components in the space provided below. This

^ williervei^ a hihdy reference whenever you need toreprb^am your remote control.

CABLE

Cable TV Converter Box

□

VCR

Video Cassette Recorder

Compact Disc Player

DSS

Digital Satellite System

RCVR

Receiver or Amplifier

LD I

Laser Disc Player

Other Component

other Component

Other Component

Other Component |

- 3 1 -