Panasonic CT-36SF24 - Manual (Page 16)

Special Functions
PIP (Picture in Picture) Button
This feature allows viewing one channel program while
monitoring another. The monitored source (PIP) must be
a different video source (such as a VCR) when connected
to the input jacks.
• S-Video connection will also operate the PIP feature
(refer to OPTIONAL S-VIDEO VHS CONNECTION
section)
• When the Main Picture is in Video mode with no signal,
the PIP will not operate properly.
PIP Operation
1. Turn VCR ON and select a desired channel.
operate TV Remote functions, if 2. Press
necessary.
PIP
Press (set must be ON). The PIP frame will
appear at the position it was last displayed. The Main
Picture Video Source and PIP Video Source will
display on screen momentarily. Audio will be that of
Main Picture.
3.
PIP
4. Press again to cancel PICTURE IN PICTURE
feature (if desired).
NOTE: For PIP Video source connection, refer to the
PIP EXTERNAL VIDEO AND ANTENNA
CONNECTIONS section.
Swap Button
SWAP
Press L“J (when the PIP frame is displayed) to
interchange what is being viewed on the Main Picture with
that of the PIP frame.
VIDEO 1
PIP CH 2
Size Button
SIZE
P r e s s ( w h e n the PIP frame is displayed) to choose
either the large or small PIP frame.
Freeze Button
FREEZE
Press
o
to stop action in the PIP frame.
Main
Picture
Freeze
Frame
FREEZE
• PressingCiD whenthePIPframeisnotdisplayed, will
display a snapshot image of the main picture in the PIP
frame.
FREEZE
• Pressing
o
when PIP frame is displayed, will stop
action in the PIPframe. Press the FREEZE button again
to continue action.
PIP
• Press to remove PIP frame.
Move Button
The PIP frame may be placed at any corner of the Main
MOVE
PIP MOVE button (when
NOTE: Each time is pressed (when the PIP frame
is displayed), the PIP frame will move
counterclockwise as illustrated.
Picture by pressing the
the PIP frame is displayed).
MOVE
NOTE: Audio will be that of Main Picture.
- 1 6 -