Set up features, Auto programming, Helpful hints – Panasonic CT-36SF24 User Manual
Page 29: Manual programming
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Auto Programming
- The Auto Programming
feature allows you to place all channels with a video signal
into Channel Scan Memory. When you press A or^,
only those channels with a video signal will be accessed.
NOTE: TV or Cable Tuning mode must be set properly for
your system.
Set Up Features
1. Press
2.
Press ^ or
Icon.
to display the Main Menu.
and or^ to highlight the Set Up
3. Press to display the Set Up Menu.
4.
Press A or ^ to highlight AUTO PROGRAM.
5.
Press or ^ to start Auto Programming Scan.
Channels will automatically advance until all channels
have been scanned.
• Channel numbers with video signal present will turn
blue which indicates stored in Channel Scan Memory.
6.
Press ^3 twice to exit menus.
NOTE: Some channels with very weak signals may be
locked into memory. These must be deleted
manually using the Manual Program feature.
Helpful Hints:
After Auto Programming:
Blue channel number indicates channel is in Channel
Scan Memory.
All channels are available by direct access using the
Keyboard numbers “0 through 9”.
After Auto Programming Scan has completed, up to 15
channels will be programmed into the FAVORITE
Channel Scan if space is available. Any original
channels that were programmed into FAV CHANNEL
will remain. (Refer to Favorite Channel Scan for
deleting unwanted channels.)
Manual Programming
- This feature allows
you to select which channels are placed into Channel
Scan Memory so when you press
A
or ^ only those
channels you desire will be accessed.
1. Press the (US to display the Main Menu.
2.
Press
A
or ^ and or ^ to highlight the Set Up
Icon.
3.
Press ifeO) to display the Set Up Menu.
4.
Press
A o r t o highlight
MANUAL PROGRAM.
5.
Press or ^ to display Manual Programming
Menu.
6.
Use the Remote Control Keyboard numbers “0
through 9” or
A
or ^ to select channels.
7.
Press ^ to add channel(s) to memory (blue). Press
the ^ to delete channel(s) from memory (yellow).
8.
Repeat Steps 6 and 7 to continue adding or deleting
channels.
9.
Press ^3 twice to exit menus.
- 2 9 -