Panasonic DVD-RV80 - Manual (Page 39)

□
Front (L) Center Front (R)
Large/Small Large/Small/No Large/Small
► Underlined items are factory preset.
In case of surround speaker (L)
Large/Yes Small/Yes
Speaker
Center delay time
(Ojns)
Settjng
[g]ia@Ei[g]
cmi
tdBj limi LtlBj
Press RETURN to exit
Surround delay time
(Q-m-S)
• Underlined items are factory preset.
Ideal surround
speaker position
Place all your speakers within this circumference
Center
channel balance (0 dBt
Subwoofer
channel
balance
fOdBf
channel balance (0 dBf channel balance (0 dBf
• Underlined items are factory preset.
H o m e t h e a t e r
i
Setting the size and presence of your
speakers
1. Press the cursor buttons [ A , T , ' 4 , to select the item and
press [ENTER],
2. Press the cursor buttons [▲, T ] to select the setting and
press [ENTER],
• Large speaker icon
If the speaker supports low-frequency (under 100 Hz) reproduction
• Small speaker icon
If the speaker does not support low-frequency reproduction.
• If you do not connect a subwoofer, it is preferable to connect front
speakers (L/R) capable of producing bass of less than 100Hz.
Delay time
I DVD I (Dolby Digital only)
1. Press the cursor buttons [ A , to select the item and
press [ENTER],
2. Press the cursor buttons [▲, T ] to adjust the delay time and
press [ENTER],
• Center speaker
Set delay time to “0 ms” (factory preset) if D f
is less than or
equal to Dc.
If D f -D c = then set to
approx. 1 'k feet (50 cm) 1.3 ms
approx. 3 feet (100 cm) 2.6 ms
approx. 5 feet (150 cm) 3.9 ms
approx, 6 feet (200 cm) 5.3 ms
► Surround speakers
Set delay time to “0 ms" (factory preset) if D f
and Ds are equal.
If D f -D s = then set to
approx. 6 feet (200 cm) 5.3 ms
approx, 12 feet (400 cm) 10.6 ms
approx. 18 feet (600 cm) 15.9 ms
Channel balance
1. Press the cursor buttons [ A , T , ◄, ►] to select “Test" and
press [ENTER].
A test signal is output from one speaker at a time, starting with the
front left speaker and proceeding clockwise.
FRONT(L) ^
i
SURROUND(L)
CENTÉR- .FRONT(R)
1
SURROUND(R)
2. While listening to the test signal, press the cursor buttons
[ A , ▼] to adjust the volume of the center and surround
speakers so they are the same apparent volume as the front
speakers. (The front speakers cannot be adjusted here.)
3. Press [ENTER]. (The test signals are stopped.)
•A test signal is not output from the subwoofer. To adjust its volume,
play something, then return to this screen to adjust to your taste.
£
0)
e
o
E
5
VOT8621