Panasonic DVD-RV80 - Manual (Page 36)

2-3*
■RETURN
1
ACTION
Disc Lanauages __ IZ___ 1
O
.2 ftatinps Level Stf
HB 3 Menu Language English
'4 On-Screen Messages
on.5 FL Display Bright
SL 6 TV Aspect 4:3
BL* 7 Digital Audio Output
tW- 'a speaker Setting
9 Other Settings
2-channel
Press RETURN to exit
ti.
s
£
q>
E
5
O
Digital Audio Output '
O "
[Ï3 W Downi CorwetìW „ No I
2 Dolby Digital Bitstream
3 OTS Digital Surround PCM
Press RETURN to exit
3 r:
VOT8621
Home theater
Selecting digital output
Select the digital output to be output from the optical or coaxial digital
audio output terminal of the player.
(Display examples are from DVD-RV80.) ■
1
Press [ACTION] in the stop mode.
The initial settings screen is displayed.
2
Press the cursor buttons [ A ,
▼]
to
select
“ 7
Digital Audio Output” and
press [ENTER].
3
Press the cursor buttons [ A ,
▼]
to
select the item and press [ENTER].
1 PCM Down Conversion
Select whether to output audio on DVD recorded in 96 kHz
linear PCM as is (No) or to convert it to 48 kHz for output
(Yes).
2 Dolby Digital
To select the signal format (Bitstream or PCM) to be output
from the optical or coaxial digital audio output terminal
during playback of DVDs recorded in Dolby Digital.
3 DTS Digital Surround
To select the signal format (PCM or Bitstream) to be output
from the optical or coaxial digital audio output terminal
during playback of DVDs recorded in DTS Digital
Surround.
[ dvd - rvsd I
To select whether DTS Digital Surround bitstream is output
from the optical or coaxial digital audio output terminal or
no digital audio is output during playback of DVDs
recorded in DTS Digital Surround.
4
Press the cursor buttons [ A , T ] to
select the setting and press [ENTER].
When “1 PCM Down Conversion" is selected
1 No (Factory preset)
No digital audio is output during playback of DVDs
recorded in 96 kHz linear PCM.
• If the DVD is recorded in 48 kHz linear PCM, digital audio
converted to 48 kHz/l6 bit is output irrespective of the
setting,
•Audio will be output using the original audio recording
system if the DVD has not been copyright-protected.
2 Yes*i
During playback of OVDs recorded in 48 kHz or 96 kHz
linear PCM, digital audio converted to 48 kHz/16 bit is
output.
(Digital output of PCM audio is restricted to 48 kHz/16 bit or
below for copyright protection.)
When “2 Dolby Digital” is selected
1 Bitstream*2 (Factory preset)
Dolby Digital bitstream (1ch-5.1ch) is output during
playback of DVDs recorded in Dolby Digital.
2 PCM
Digital audio converted to 48 kHz/16 bit PCM (2ch) is
output during playback of DVDs recorded in Dolby Digital.