Amplifier and speakers or system component – Panasonic DVD-RV80 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting audio equipment with 2-channel audio input terminals
You can enjoy stereo sound it you connect an amplifier or system component that has 2-channel audio input terminals.
Amplifier and speakers or system component
• Read the instructions for the amplifier and speakers or
system component for connection details.
•
Dolby Pro Logic amplifiers
• If you connect a Dolby Pro Logic amplifier, you will
also need to connect center and surround speakers to
enjoy surround sound. Read the instructions for the
equipment for connection details.
•Turn V.S.S. off page 22). Dolby Pro Logic will not
function correctly if V.S.S. is on.
When you have finished connection
• Go to “7 Digital Audio Output" and set ‘‘1 PCM Down Conversion” to
“No" page 36).
• In "8 Speaker Setting”, select “2 2-channer {■• page 38).
Connecting audio equipment with digitai audio input terminals
to
s
S
É
Q>
E
£
When you have finished connection
Make changes to “7 Digital Audio Output” as shown page 36).
PCM Down Conversion
Yes®
Dolby Digital
PCM
DTS Digital Surround
EHsasniapcM
1
DVD-RV60
1 Off
^ If this is set to "No", no audio will be output when DVDs recorded in
96 kHz linear PCM are played. {Audio will be output as it is if the
DVD does not have copyright protection recorded on it.)
•These changes to digital audio output must be made,
otherwise signals the equipment cannot handle, bitstream, will
be output, tf the signals are output as bitstream, “noise” will be
output which can cause harm to your ears and speakers.
VQT8621