Panasonic DVD-RV80 - Manual (Page 38)

2-3-45
RETURN
1
ACTION
Q^Pisc Languages
O -2 Platings Level 8^
HD 3 Menu Language English
□B 4 On-Screen Messages
HB 5 FL Display Bright
«3. 6 TV Aspect 4:3
WL 7 Digital Audio Output
ffl- 8 Speaker Setting 2-channel
' 9 Other Settings
Press RETURN to exit
Si
S
S
o
E
5
^
o
o
OB
m.
m.
m
Speaker Setting
1 Multi-channe)
\2 2-channel 1
Press RETURN to exit
V_______________ ^
GD cs) ► a
Home theater
Speaker Setting
Here you can change the settings for the built-in decoder.
These changes will have no effect if you connect the player to other
equipment through the digital audio output terminals. Make changes
to the settings on the equipment you have connected.
Common procedure
1
Press [ACTION] in the stop mode.
The initial settings screen is displayed.
2
Press the cursor buttons
[
A
,▼]
to se­
lect “8 Speaker Setting” and press
[ENTER].
3
Press the cursor buttons [ A , T ] to se­
lect the item and press [ENTER].
1 Multi-channel
If you have connected three or more speakers. (Proceed to
step 4)
2 2-channel (Factory preset)
If you have connected 2 speakers. (You will return to the
menu shown in step 1. Settings are not necessary.)
4
Change settings to suit your speakers
and the listening position (^ page 39 ).
•Setting the size and presence of your speakers
Choose “Yes” for speakers you have connected. Sound will
not be output if you choose “No”.
• Delay time
Allows you to make up for differences in distance if you
cannot place your speakers in the optimum position.
(Dolby Digital DVD only)
•Channel balance
Allows you to adjust the output level of the speakers to make
up for differences in volume caused by different types of
speaker or distance.
5
Press the cursor buttons [ A , ▼ , M ,
^] to select '‘Exit” and press
[ENTER].
The screen illustrated in step 2 is displayed.
To cancel during setup operation
Press [RETURN], (The previous screen is displayed.
To exit the initial settings screen
Press [ACTION] or [RETURN].
5 -S'
^ [ ente
VQT8621