Panasonic DVD-RV80 - Manual (Page 20)

I STOP
Cursor
buttons/
ENTER
CANCEL
►► SLOW/SEARCH
1
PLAY MODE
o>
c
.0
2
Q)
§
c
s
■O
theo^
Track Time
ti. PLAV toaiflrt
Clear
Clear all
Total time
FL display {e.g. CD)
_______ - .
■ - ~ ■ — ■ ■
Flashes
CD CD CD
CD CD CD
CD CD CD
'^ChQOSS'a-tiataC’^then pr^B^ER.^
Track Time
2:02
Clear
Clear all
llotal time
I 2:02
L PressFLAY to^tatt
Track No.
Program No.
PLAY
C
VQT8621
Advanced operations
Program play
The player plays the tracks on the disc in the order you specify.
Up to 32 tracks can be programmed.
1
Press [PLAY MODE] while stopped
until the illustrated screen appears.
• If “Q" appears on fhe television, press [■ STOP] to cancel
the RESUME function, then press [PLAY MODE).
2
Press the numeric buttons to select
the track {•* item @ on page 7 for number entry).
The selected track is stored in memory.
• If you press [ENTER], you can use the cursor buttons [A. ▼]
to select a track. Press [ENTER] to register the track
number. {With DVD-RV80, if you select “All", all the tracks
on the disc will be selected.)
• Repeal step 2 to select another track.
• If you enter over 32 tracks, the last programmed track is
replaced with the new one.
3
Press
[►
PLAY].
Play now begins in the programmed sequence.
To exit the screen
Press [PLAY MODE] twice.
To add tracks
1. Press [■ STOP] twice during program play to show the program
play screen.
2. Select the desired available item with the cursor buttons [ A , V ] ,
then repeat step 2.
• Press [■^◄, ►► SLOW/SEARCH] to turn the pages of the program
to make the selection quicker.
To return to normal play
1. Press [■ STOP] twice during program play.
(Program play is suspended.)
2. Press [PLAY MODE] twice.
3. Press [► PLAY],
•The program is retained in memory.
Operation by observing the unit’s FL display
• Use the numeric buttons to enter track numbers.
•To check the program, press the cursor buttons
[ A , V ] .
Clearing the program
When the program play screen is displayed
•To clear the programmed tracks one by one
Select the track, move to “Clear” with the cursor buttons [ A, V, ◄,
► ] and press [ENTER]. (Selecting the track and pressing
[CANCEL] also clears the programmed track.)
•To clear the whole program
Move to “Clear air with the cursor buttons [ A , V , ◄ , ► ] and press
[ENTER], (The program is also cleared when the player is switched
to the standby mode or turned off, or the disc tray is opened.)