Refilling or replacing the verification stamp – Panasonic Panafax UF-270 User Manual

Page 88

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Refilling or Replacing the Verification Stamp

The verification stamp contains ink. When the stamp appears faded or hard to read, the stamp should

be refilled with ink or replaced.

1. Turn the power OFF

(O).

Unplug the power cord. Remove the sub tray and the handset. Stand

the machine up. Remove the Bottom Board Unit Screws and open the Bottom Board Unit towards
you.

(a) To refill the stamp with ink, remove the Verification Stamp Unit, and refill the stamp by placing

a few drops of specified ink into it. Make sure that ink does not spill from the stamp when

it is turned over. Then reset the stamp unit.