Panasonic Panafax UF-270 - Manual (Page 77)

Information Codes
When something unusual occurs, the display may shew one of the information codes below. These
will help you fix the problem.
Information
code
Meaning Action
001 Recording paper jam Remove jammed paper
002
004
(See page 79).
010 No recording paper or recording
paper not set properly Reload recording paper.
030 Document misfeeding 1. Reload the document properly
(See page 29).
2. Remove document Jam (see page 80).
031 Document paper is too iong or 1. Reload the document properly (see
Jammed. page 29).
Document iength exceeds 39.4
inches
(1 meter).
2. Remove document Jam (see page 80).
060 Cover is open or door opened Close the Transmission Guide Unit and
during communication. Front Cover.
400 During initial handshake, receiv- 1. Check with the other party.
464 ing station did not respond or
communication error occurred. 2. Reload the document and try again.
402 During initial handshake, com- Reload the document and try again.
404
405
munication failure occurred.
432
403 No poliing capability at the Ask remote side to set ‘POLLED = ON'.
remote side
407 No confirmation from the Wait a few minutes and transmit again.
468 receiving station for the
469 previous page sent
408 Remote side confirmation of Wait a few minutes and transmit again.
409 previous page is iiiegible.
410 Invalid command received. Check with the other party.
76