Panasonic Panafax UF-270 - Manual (Page 14)

Installing/Replacing Recording Paper
1. Press down on the latch button on the right side of the cover and open the Receiving Unit.
2. Set the recording paper into the unit and feed the leading edge of the paper between the guide
plates of the cutter unit until it projects out of the unit. If it is set incorrectly, the machine will not
reproduce images.
3. Close the Receiving Unit carefully by pressing both corners down until the cover locks into position,
you will hear a "click” sound.
4. The recording paper projecting from the unit will be cut automatically when your machine is turned
on. Remove this cut paper.
12