Panasonic Panafax UF-270 - Manual (Page 108)

Setting Up Your Machine for Confidential Communications
To use Confidential Communications you must first preset the Confidential Communication Fax
Parameters described below. Then, every time you actually send a Confidential Fax you must set
a Confidential Code,
1. Confidential Communications Fax Parameter:
This switches the Confidential Communications function VALID or INVALID.
2. Own Telephone Number:
Your full telephone number should be entered.
3. Network Password and Polling Password
You may use Network Password and Polling Password to prevent outside facsimiie(s) from using
the Confidential Communication network. The same password must be provided to all the machines
inside the network.
4. Confidential Code:
A four-digit code which you must assign to each Confidential Fax you send. It identifies the fax
when it is stored in the Relay Station. The receiving person must know the code in order to poll
the fax from the Relay Station.
15
NOTC
To set Polling Password, see page 25.
107