Panasonic Panafax UF-270 - Manual (Page 18)

SETTING UP YOUR FACSIMILE
Before sending or receiving a document, you should set all user and fax parameters required by
your machine.
User Parameters
Setting the Date and Time
You can set or reset the date and time when your machine is in standby, or when you have already
placed a document on the ADF.
1
and
7 1
U S E R P A R A M E T E R S
Ф START
The display will show a date and time. Use the
keypad to enter month (two digits), the new day
(two digits), year and time (24-hour clock).
Ex; 15 DEC., 1990 15:00
Q] [1] [I] [1] [IIS] S] [E [Tl [5] E] S]
If you make a mistake, you can use to
move the cursor to the left and 13 to move
the cursor to the right. Key in the correct num­
ber as necessary.
To set the date and time,
D A T E & T I M E
3 1 - 0 1 . 1 9 0 0 1 2 : 0 0
D A T E & T I M E
B s . 1 2 - 1 9 9 0 1 5 : 0 0
Ф START
15
LOGO appears in the display. You can go on to
set the LOGO, or return to standby the press-
inalSTOPl.
LOGO 1
1 5 - D E C - 1 9 9 0 1 5 : 0 0
16