Panasonic Panafax UF-270 - Manual (Page 71)

Journal Printout Explanation
( 1) Printout date
(2) Printout time
(3) Communication number
(4) Communication result
(5) Number of pages
transmitted or received
( 6) Duration of communication
(7) Type of communication
( 8) Remote station identification
(9) Communication date
(10) Communication start time
(11) Diagnostic
(
12) Own LOGO
(13) Own ID number
(14) Dialing method
(15) Call back message
(16) Station Name
(17) Telephone No.
(18) Received ID
(19) Resolution
Day-Month-Year
HounMinute
1 — 3 2 (Does not always begin with 1 when printed
out manually.)
“OK” indicates that the transmission was successful.
“S OK” indicates that STOP was pressed during
communication,
Three-digit information code (see page 76) appears
when there was a problem.
The two-digit number is the number of pages success­
fully transmitted or received. When the Total Page
function is activated or transmitted from memory, two
two-digit numbers will appear. The first two-digit num­
ber represents the number of pages successfuily
transmitted. The second two-digit number represents
the total number of pages that were attempted to be
transmitted.
An asterisk indicates that the quality of some
received copies was poor.
Hour: Minute; Second
“XMT” means Transmission
"RCV” means Reception
A name indicates station name recorded in this
machine. A number indicates remote station’s ID
, number or Telephone number. Group 2, 3 indicates
that the remote station was a CCITT G2, G3 machine.
Day-Month
Hour:Minute
For service personnel only
Up to 25 characters
Up to 20 digits
“T” indicates direct dialing or One-Touch/Abbreviated
dialing with no recorded station name.
Appears when voice contact was requested.
Remote Station Name
Remote Telephone Number
Remote ID
See page 27
70