General, Fm stereo radio, Am radio – Panasonic CQ-DF201U User Manual
Page 29: Cd piayer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□ General
Power supply;
Current consumption;
Maximum power output;
Tone adjustment range;
Bass;
Treble;
Suitable speaker impedance;
Pre-Amp output voltage;
Output impedance:
Dimensions (WxHxD):
Weight:
□ FM Stereo Radio
Frequency range:
Usable sensitivity:
50 dB quieting sensitivity;
Frequency response:
Alternate channel selectivity;
Stereo separation:
Image response ratio;
IF response ratio:
Signal/noise ratio:
12 V DC {11 V-16 V), test voltage 14.4 V, negative ground
Less than 2.2 A (CD play mode; 0.5 Wx4 channels)
45 Wx4 channels at 400 Hz, Volume control maximum
±12 dB at 100 Hz
±12 dB at 10 kHz
4-8 Q
2.0 V {CD play mode;1 kHz,0dB)
200
0
7"x1iVi6"x5Va" (178x50x150 mm)
3lbs. loz (1.4 kg)
87.9 MHz-107.9 MHz
11.0 dBf. (1.25 piV, 75 Q)
15.2 dBf. (1.6 piV. 75 O)
30
Hz-15
kHz
(±3dB)
75 dB
42 dB (1 kHz)
75 dB
100 dB
70 dB
a®
□ AM Radio
Frequency range:
Usable sensitivity:
□ CD Piayer
Sampling frequency:
DA converter;
Error
correction
system:
Pick-up type:
Light source:
Wave length:
Frequency response:
Signal/noise ratio:
Total
harmonic
distortion:
Wow and flutter:
Channel separation:
530 kHz-1710 kHz
28dB/nV (25 цУ, S/N 20 dB)
32 times oversampling
MASH • 1 bit/4 DAC system
Panasonic super decoding algorithm
Astigma 3-beam
Semiconductor laser
780 nm
20 Hz-20 kHz(±1 dB)
96 dB
0.01 % (1 kHz)
Below measurable limits
75 dB
Above specifications comply with EIA standards.
Note:
© Specifications and the design are subject to modification without notice due to improvements in technology.
DBZOilU
29