Fuse, Maintenance, Specifications – Panasonic cq-dpg55len User Manual
Page 43: Fuse maintenance specifications
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Fuse
Be sure to use a fuse of the specified rating (15A) when replacing a blown fuse. Fuses with higher capacity
ratings, use of any substitute, or connection without a fuse may result in a fire hazard or damage to the unit, if
the replacement fuse fails, consult your nearest authorized Panasonic Service Center.
Maintenance
To clean the exterior of this unit, use a soft cloth to wipe the surface.Do not use benzine, thinner, or any other
type of solvents.
Specifications
General
Power Supply :
DC 12V (11V - 16V), Test Voltage 14.4V, Negative Ground
Tone Controls :
Bass; ± 12dB at 100Hz
Current Consumption
Treble; ±12dB at 10kHz
Less than 2.5A (CD mode, 0.5W 4-Speaker)
Maximum Power Output
40W
X
4 (at 4Q)
Power Output
20W
X
4 (DIN45 324, at 4i2)
Speaker Impedance
4 - s a
Dimensions (Main unit)
178(W)x 50(H)
X
150(D) mm
Weight (Main unit)
1.6 kg
FM Stereo Radio
Frequency Range
87.5- 108MHz
Usable Sensitivity
6dB/|jV(S/N 30dB)
Stereo Separation
35dB{at1kHz)
MW Radio
Frequency Range
531 - 1,602kHz
Usable Sensitivity
28dB/|jV (S/N 20dB)
LW Radio
Frequency Range
153-279kHz
Usable Sensitivity
32dB/|jV (S/N 20dB)
CD Player
Sampling Frequency
32 times oversampling
DA Converter
MASH«1 bit/4 DAC System
Error Correction System
Panasonic Super Decoding Algorithm
Pick-Up Type
1 -beam
Light Source
Semiconductor laser
Wavelength
780 nm
Frequency Response
20 Hz-20,000 Hz (±1 dB)
Signal to Noise Ratio
98 dB
Total Harmonic Distortion
0.01 %(1 kHz)
Wow and Flutter
Below measurable limits
Channel Separation
75 dB
Note;
Specifications and the design are subject to possible modification without notice due to improvements.
CQ-DPG55LEN
43