Panasonic LF-D102U - Manual (Page 39)

Specifications
DVD-RAM Drive
Power requirements (AC adaptor VSK 0558) AC 100-120 V 50/60 Hz
Input current 0.3-0.25 A
Drive model number LF-D102
Interface supported SCSI-2 (Fast SCSI) (Supports SCAM Level 1)
Seek time
(using Panasonic’s
measurement method)
DVD-RAM 120 ms
DVD-ROM
85 ms PD
CD-ROM
Sustained data transfer rate
DVD-RAM 1,385 KB/s
DVD-ROM 2,770 KB/s (2 X speed mode)
PD 518-1,141 KB/s
CD-ROM 1,293-3,000 KB/s (Max. 20 X speed)
Buffer memory 2 MB
Audio output level (impedance) Line out 0.84 Vrms (47 kO)
Drive orientation Horizontal/Vertical
Allowable operating temperature range 41-95“F (5-35°C) (during operation)
Allowable operating humidity range
(no condensation)
10-80% RH (during operation)
Dimensions (W x H x D) 65/8” X 131/32" X
921
/
32
" (168 X 50 X 245 mm)
(excluding protrusions)
Weight (main unit) 3.3 lbs. (1.5 kg)
SCSI connector type 50-pin connector (pin type)
Applicable media
Read/Write DVD-RAM, PD
Read only
DVD-ROM, DVD-VIDEO^i, DVD-R^2^3_ CD-DA^^ CD-
ROM (Supports XA), Photo CD (Supports
multisession), Video CD, CD-EXTRA, CD-R/RW*2*5_
[120 mm Disc Media]
A MPEG2 decoder board (not included) or MPEG2 decoder software (not included) is also necessary to play
DVD-VIDEO discs.
Supports discs with a capacity of 3.95 GB that are written with the Disc-at-Once option.
Depending on how the disc is written, performance may not match the specified levels.
CD-G not supported.
Supports MultiRead for CD-R and CD-RW.
Specifications and external design are subject to change without notice because of product improvements.
39