Computer, Side panels el, Tray – Panasonic LF-D102U User Manual
Page 11: Checks and preparations before installation, Scsi connecting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
computer
SCSI
host adaptor
©
©
©
©
©
Side panels El
OVentilatlon slots (on both sides of the DVD-RAM drive )
These slots allow ventilation to prevent the temperature In the DVD-RAM drive from rising. Ensure these
slots are not blocked when installing the DVD-RAM drive to prevent malfunction of the DVD-RAM drive .
©Tray
The tray is for inserting DVD-RAM discs, PD cartridges and 120 mm Disc Media.
Insert the media with the printed title side facing up.
• Insert the media in the tray, then push media into the DVD-RAM drive to load the tray. (You can also load
the tray by pushing on it directly.)
Cartridge media E]
120 mm Disc Media B
Checks and Preparations Before Installation
SCSI connecting
This DVD-RAM drive conforms to the SCSI-2 standard.
A SCSI host adaptor is therefore required to connect the DVD-RAM drive with a computer.
If a SCSI host adaptor is not already Installed in your computer, you must purchase one separately.
Example B
No more than 7 SCSI units ( ® - © ) can be connected to a computer.
Also, the total length of the SCSI cable from the computer to the last DVD-RAM drive must be shorter than the
length specified by the SCSI host adaptor to be used.
11