Panasonic LF-D102U - Manual (Page 27)

Using DVDRgn (region number setting utiiity)
DVDRan
This software is used to set the region number of the DVD-RAM drive (this setting can only be made a
maximum of four times). The regions where DVD-ROM and DVD-VIDEO discs can be played are specified by
region numbers. In order to play a disc, the region number on the DVD-RAM drive must match the region
number on the disc. When this drive is shipped from the factory, the region number is set to “1”.
Operating requirements for DVDRgn
Computer: IBM PC/AT compatible computer
OS: Windows 95, Windows 98, Windows NT4.0
Hard disk space: 1 MB or higher
Starting DVDRan
From the Start menu, select [Programs]-
■ Settings
[Panasonic DVD-RAM]^ [Utility]^ [DVDRgn].
1 Select the DVD-RAM drive.-
O Insert a DVD disc with the desired region
number in the DVD-RAM drive.
• If no disc is inserted, you cannot set the region
number.
3
4
Be sure to check the region number
currentiy set and the number of times
the region number can be changed.--------------------
• Under the factory default, the region number setting
can only be changed a maximum of four times, so
keep track of the number of times you change the
setting. (You cannot change it more than four
times.)
The radio button(s) representing the
region number(s) of the inserted DVD disc
wiil be seiectable. Select the region
number for the inserted disc. ----------------------------
You can select the region number by country name.
Click [Select Country Name...], and select your
country.
g Click [Set Region Number].
DVD-RAM Regional Selling Piogiain.
r Seled Drive
HE
j[F): MATSHITA. PD-2 LF-D100
E
0
rs Drive Status
_^J
Region Number : No. 1
User Reset Available : 4
T Select Region Number ^------------------------------------
Ngfl & Q No>3j
Qf y_o,4 OJ NPrSj Q No,®
r
jSelect Country Name... jSet Region b umber!
. .
_!
No DVD disk is inserted.
■..... ■ 1 r ..................... .
Note:
• Please note that the number of times the DVD-RAM drive region number setting can be
set/changed is limited to 4.
• When [User reset available] is “1”, be absolutely sure to set the region number for the DVD discs you
wish to playback in future.
After this final setting, you will be unable to change the region number again and will only be able to
playback DVD discs with the region number that is set.
• When changing the region number for the fourth and last time, be sure to insert a DVD disc that only
displays one region number. If a disc displaying multiple region number is inserted, you will be unable
to set/change the region number.
J
29