Installing the supplied application software, Note, Insert the supplied cd-rom into the dvd-ram drive – Panasonic LF-D102U User Manual
Page 32: J| from the start menu select [run, O in the “open” box, Enter “e:\setup.exe” and click [ok, Click [application setup, Bnyejrsifqrnii.attej se.tup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the supplied application software
Note:
• The supplied application software is for use with this DVD-RAM drive only, and will not run on other devices.
1
Insert the supplied CD-ROM into the DVD-RAM drive.
The installation program starts automatically.
• If the installation program does not start automatically, start it manually by following the procedure
below.
{This assumes that the drive letter assigned to the DVD-RAM drive for CD-ROM media is E:.)
-j|
From the Start menu select [Run].
O In the “Open” box,
^ enter “e:\setup.exe” and
click [OK].
The installation program starts.
Tjjpe the rwme of a program, folder, or documei-it, and
Windows wHt open it for you.
□ pen: jeAsetup.exe
i
Cancel |[ Bmwse
2
Click [Application Setup].
bnyejrSiFQrnii.attej Se.tup^
3
Select Component!
Select the application to install i
and click [Next].
Installation begins.
• You can select multiple programs at the same !
time.
• Follow the on-screen instructions to proceed.
SetecI It» iippliciliont checi; bo* you t*anl lo inttal
AT .Peats the apttication't totctei
rj¡¡DVOAg^
n MPEG1 Codet
Q TJeSafe
MedaSate
tflact-. ] Ns*t> [P" Caned j
32