Panasonic LF-D102U - Manual (Page 17)

Checking use [Device Manager]
(Windows
95
/windows 98 only)
1
. From the Start menu, select [Settings], then [Control Panel].
2. Select [System], then click on [Device Manager] tab to bring up the window below which shows all devices
connected.
3. Double-click “CD-ROM", “Disk drives” and “SCSI controllers” and verify whether items 0> © ^nd Q
appear.
• If ©, © or O fails to appear, or if a yellow [!] or red [x] appears over 0, © or ©, refer to “Troubleshooting"
on page 36.
Syttem Ptopeiliei
JrGw>w5l[
Device Mawga^j Haidwae Pioties | Petionnance
1
© View rfewes hv lype Q) View devices by connection
CDHOM
S MATSHITAPD-2LF-D100 ---------
Q Disk drives
S GENERIC IDE DISK TYPEE5
<3 GENERIC NEC FLOFWOlSK
Q MATSHITAP0.2LFinOO —
DispJey edepters
Floppy disk cortroleis
Hard disk controlets
Keyboard
Monita
Mouse
Pods (COM i LPT]
SCSI conltolos
0 '#
a-Q
II
r
^ Adaptec AHA-154X/AHA-1E4X/AHA-1535 SCSI HostAd/^j
mn
] Ptopetties Rejrosh Remove Print.,.
□K ]C
Caned
-©CD-ROM/DVD-ROM side of this DVD-RAM drive is
recognized.
-©DVD-RAM disc/PD cartridge side of this DVD-RAM
drive is recognized.
■©SCSI host adaptor is recognized.
Note:
• Checking with [SCSI Adapters] on Windows NT
Double-click [SCSI Adapters] on [Control Panel],
then click [Devices]. The screen shown at right
(equipment connection statuses) is displayed.
When the SCSI host adaptor, which is connected to
DVD-RAM drive, is double-clicked, only the CD-ROM
/ DVD-ROM portion is displayed.
This is a limitation of this driver software’s
specification.
Dsiflcei I Oriva; j
If
SCSI ddapiett dfid connected devices are kted 6dow.
IDE CD-ROM [ATAPI 1.21/Dual channd PO IDE ContioUer
Adaptec AHA 2 9 o r AIC-7gK< PO SCSI Conifole
MATSHI
7
APD-
2
LFCnW
DS
Roperiies
]C
□K Cancel
17