For your reference, Checks after installation – Panasonic LF-D102U User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

When the dialog at right is displayed,

select “Install DVD Driver” and click

[Next].

Selact Iran dnd Odr

0‘irat5i

DVD

On^

OUrvtst^CVDDm«

ji <£acK

After the Installation, select “Yes, I

want to restart my computer now.”

and click [Finish].

The computer now reboots.

• You can use the DVD*RAM drive after rebooting.
• To verify that the drivers were installed correctly,

refer to “Checks after installation” below (to page

17).

For your reference:

• About the DOS driver

The DOS driver is supplied on a CD-ROM installation disc.

You can use the DVD-RAM drive under MS-DOS® by installing this driver in your computer.

Please refer to [e:\DosDrv\English\readme.txt] of the CD-ROM.

(This assumes that the drive letter assigned to the DVD-RAM drive for CD-ROM media is E:.)

Checks after installation

Follow the steps described below (to page 17) to check that the DVD-RAM drive is recognized properly.
If a problem occurs, refer to “Troubleshooting” on page 36.

Checking with [My Computer]

If this DVD-RAM drive was correctly connected and the driver programs were properly installed, icons for

DVD-RAM disc/PD cartridge and CD-ROM/DVD-ROM will be added in [My Computer).

In the example below, removable disks (DVD-RAM disc/PD cartridge) have been assigned the drive name D:,

and CD-ROMs (CD-ROM/DVD-ROM drive) have been assigned the drive name E:.

• If the correct icons do not appear, select [Refresh] from the View pull-down menu.

If the correct icons fail to appear even after selecting [Refresh], check by following the procedure “Checking

use [Device Manager]” on page 17, then refer to “Troubleshooting” on page 36.

CD-ROM/DVD-ROM icon (example: E drive)

DVD-RAM disc/PD cartridge icon (example: D drive)