Caution, Note, Copying in the same file format as the actual file – Panasonic LF-D102U User Manual

Page 29: Copying and restoring, Normal copy, Clone copy, Synchronized copy, Restore, Copying only changed files (default setting), Scheduled execution function

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

starting MPEG1 Coder

From the Start menu, select [Programs] '[Panasonic DVD-RAM]^[MPEG1 Coder]-»[MPEG1 Coder].

TOTAL:

fSTDPi

0:00:00

t I

Caution;

• Select Active Movie before using MPEG1 Coder. To start the Active Movie selection program, from the

Start menu select [Programs]-^[Panasonic DVD-RAM]-»[MPEG1 Coder]->[Active Movie Select Switch].

• Before data that you have recorded with MPEG1 Coder is used in a manner that exceeds the scope of

personal use, you must first obtain the permission of the copyright holder in accordance with copyright law.

Note:

• Refer to the help files for operating and troubleshooting procedures. The help files can be opened

either by clicking [Help] on the application, or by selecting [Programs]^[Panasonic DVD-

RAM]^[MPEG1 Coder]-*[Help for MPEG1 Coder] from the Start menu.

Using FileSafe (backup software)

FileSafe

This software can automatically back up data in specified folders, or back up only updated folders, enabling you
to protect important files efficiently.

■ Copying in the same file format as the actual file

When a job is run, a folder with the same name as the job name is created in the root directory of the

DVD-RAM disc or PD cartridge inserted into the DVD-RAM drive, and the contents of the selected source

folder are copied in the actual file format.
As a result, copied folders and files can be used in Explorer and other applications.

■ Copying and restoring

The following modes are supported.

1. Normal Copy

Same as Explorer’s Copy in that the selected source folder is simply copied to the DVD-RAM drive.

2. Clone Copy

Duplicates the contents of the selected source folders onto the DVD-RAM or PD media. (Deletes all data

in the copy destination and copies the data from the original.)

3. Synchronized Copy

Files which are not the same on the original and this DVD-RAM drive are copied to corresponding

folders, and the folder contents are updated to match each other. (When both folders contain a file with
the same name, the most recent version of the file is copied.)

4. Restore

Copy files on the DVD-RAM drive back onto the source drive to restore data.

■ Copying only changed files (Default setting)

In this mode, only files that have been changed are copied from the source folders to the DVD-RAM drive.
In the first execution, all files in the specified source folders are copied, but from the second execution on,

only those files and folders that have been newly created or changed from the previous execution are
copied.

■ Scheduled Execution function

Three Scheduled Execution modes are supported: “Keyboard Not Use Mode”, “Clock Mode” and “Interval

Mode". This allows you to define a schedule to automatically execute pre-configured jobs at a time best

suited for the data and usage of the system.