Adjusting the level of the effect speakers, Notes, For 5ch stereo – Yamaha HTR-5540 User Manual

Page 49: 7^ u i" n i i" k

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS

You can adjust the output level of each effect speaker

(center, rear left and right, and subwoofer) while listening

to a source.

Adjustment should be made witli llie remote control.

(While playing a source)

ET Press LEVEL repeatedly to select the

speaker(s) you want to adjust.

Each time you press LEVEL, the selected speaker
changes and appears on the front panel display as
follows: center, rear right, rear left and subwoofer.

♦

7^ U I" N I I" K

Center speaker output level

■a ■

I ¡•'■j

Rear right speaker output

level

j".

Rear left speaker output

U Pi. . level

SiH l"l I I ■

Subwoofer output level

Press +/- to adjust the speaker output level.

• The control range for the center or rear left and

right speakers is from +10 dB to -10 dB.

• The control range for the subwoofer is from 0 dB

to -20 dB.

DSP

Notes

•

When the speaker output modes for “lA CENTER” and “IC

REAR LR” are set to NON, and “ ID BASS” to MAIN, the
output level of those speakers cannot be adjusted because there
is no sound coming from these speakers.

• When you adjust the output level with LEVEL, the settings you

made with the test tone will be changed.

• We recommend adjusting the speakers by following the steps

described in “Using the test tone” on pages 21 and 22.

■ For 5ch Stereo

You can adjust the volume level for each channel in 5-
channel stereo mode.

Control range: 0 to 100%

• CT level

(Center level)

• RL level

(Rear left level)

• RR level

(Rear right level)

11 Select 5ch Stereo.

Press /\ / \/ repeatedly to select the

speaker(s) you want to adjust.

O >

m <

3J >

d o

O m

z D

Press +/- to adjust the speaker output level.

Memory back-up

The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby
mode. However, if the power cord is disconnected
from the AC outlet, or the power supply is cut for
more than one week, the stored data will be lost. If so,

set the output level again.

' Once you press LEVEL, you can also select the speaker(s) to

be adjusted by pressing

\/ / /\.

|l—