Yamaha HTR-5540 - Manual (Page 10)

CONTROLS AND FUNCTIONS
Remote control
This section describes the remote control controls and
their functions.
O
POWER
Turns this unit on, or set it to the standby mode.
& SLEEP
Sets the sleep timer.
0 Input selector buttons
Select the input source.
O PRESET +/-
Selects preset station numbers 1 to 8.
0
DSP program
Select DSP programs. Press a button repeatedly to select a
DSP program within that group.
0
LEVEL
Selects the effect speaker channel to be adjusted.
O Multi control section
Used when changing the setting and to implement the
settings.
0
TEST
Outputs the test tone to adjust the speaker levels.
0
MUTE
Mutes the sound. Press again to restore the audio output
to the previous volume level.
® VOLUME A/v
Increases or decreases the volume level.
0 6CH INPUT
Selects the audio source connected to the 6CH INPUT
Jacks.
© A/B/C/D/E
Selects preset station groups A to E.
© SET MENU
Selects the SET MENU mode.
© STEREO/EFFECT
Switches between normal stereo and DSP effect
reproduction. When STEREO is selected, 2-channel
signals are directed to the main left and right speakers
without effect sounds and all Dolby Digital and DTS
signals (except the LEE channel) are mixed down to the
main left and right speakers.
6