Yamaha HTR-5540 - Manual (Page 38)

TUNING
Automatic and manual tuning
There are 2 ways to tune; automatic and manual.
Automatic tuning is effective when station signals are
strong and there is no interference.
■ Automatic tuning
control) to select TUNER as the input source.
DVD D-TV/CBL VCR
CD TUNER tv1D/CD-R
Remote control Front panel
Press FM/AM to select the reception band.
“FTVI” or “AM” appears on the front panel display.
y Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator lights up on the
front panel display.
AUTO
Lights up
If the colon (:) appears on the front panel display,
press PRESET/TUNING (EDIT) to turn it off.
PRESET.TUNING D-TV/CBL DVD MD/CDfl TUNER ,
! .*1 .*1 ! :
Cl
Press PRESET/TUNING <3 /1> once to begin
automatic tuning.
Press C> to tune in to a higher frequency, or press <3
to tune in to a lower frequency.
VCR V-AUX D-TV/CBL DVD MD/CDR TUNER ,
! .*1 .*1 ! I
When tuned in to a station, the “TUNED” indicator
lights up and the frequency of the received station is
shown on the front panel display.
;(t)i
• Use the manual tuning method if the tuning search does not
stop at the desired station because the signal is weak.
■ Manual tuning
If the signal from the station you want to select is weak,
you must tune in to it manually.
11 Select TUNER and the reception band
following steps 1 and 2 described in
“Automatic tuning” at left.
Ei Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator goes off from
the front panel display.
AUTO
Goes off
If the colon (:) appears on the front panel display,
press PRESET/TUNING (EDIT) to turn it off.
PRESET.TUNING V-AUX DTV/GBL DVD MD/CDR , TUNER ,
! .*1 .*1 ! :
El
Press PRESET/TUNING <]/l> to tune in to
the desired station manually.
Hold down the button to
continue the tuning search.
Note
• Manually tuning in to an FM station will automatically change
the reception mode to monaural to increase the signal quality.
34