Yamaha HTR-5540 - Manual (Page 45)

SET MENU
zr Press +/- repeatedly to
change the setting of the
item.
w Press /\/s/ repeatedly until the menu
disappears or simpiy press one of the DSP
program group buttons to exit SET MENU.
PROa=IAM ----------
JAZZ ROCK
CLUB CONCERT
TAINMENT SPORTS MOVIE
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby
mode. However, if the power cord is disconnected
from the AC outlet, or the power supply is cut for
more than one week, the stored data will be lost. If so,
adjust the items again.
1 SPEAKER SET (speaker mode
settings)
Use this feature to select suitable output modes for your
speaker configuration.
Notes
• When 96-kHz sampling digital signals arc input to this unit,
some items are not affected.
• When 6CH INPUT is selected as the input source, level
adjustments in items 1A through ID are not affected.
■ 1A CENTER (center speaker
mode)
By adding a center speaker to your speaker configuration,
this unit can provide better dialog localization for several
listeners and superior synchronization of sound and
images.
Choices: LRG (large), SML (small), NON (none)
LRG
Select this if you have a large center speaker. The entire
range of the center channel signal is directed to the center
speaker.
SML
Select this if you have a small center speaker. The low-
frequency signals (90 Hz and below) of the center
channel are directed to the speakers selected with “ID
BASS”.
NON
Select this if you do not have a center speaker. All of the
center channel signal are directed to the main left and
right speakers.
■ 1B MAIN (main speaker mode)
Choices: LARGE, SMALL
LARGE
Select this if you have large main speakers. The entire
range of the main left and right channel signal is directed
to the main left and right speakers.
SMALL
Select this if you have small main speakers. The low-
frequency signals (90 Hz and below) of the main channel
are directed to the speakers selected with “ID BASS”.
m <
33 >
d o
O m
z D
41