Dimming the display screen, Setting the sleep timer, Recording on an external av component – Yamaha CINEMASTATION NX-C300 User Manual
Page 44: Dimming the display screen setting the sleep timer, Other functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Other Functions
Dimming the display screen
• In any active mode, press DIMMER on the remote
control to select the desired brightness:
DIM 1: 70% brightness
DIM 2: 40% brightness
DIM OFF: normal brightness
Setting the sleep timer
The sleep timer switches the receiver to Eco
Power standby mode automatically at the preset
time.
O
Press SLEEP on the remote control until “bLEFP
” appear on the display panel ('i
= 15, 30,45,
60 or OFF).
0 To select the next sleep timer value, continue
pressing SLEEP while in sleep timer mode until
the desired turn-off time is displayed,
SLEEP appears on the display panel, except when
“bLEEi^ CEE"
is selected.
Before the receiver switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
i S” ^
3” ^
^
.%. itr’[ rrTl I ”
C “T DLCCr J
To cancel the sleep timer
• Press SLEEP until “bLEEP uFF” appears,
Recording on an external AV
component
O
Connect the external recording component to
LINE OUT (See“ Connecting external AV
components” on page 16).
0 Select the source to record from this DVD
receiver (DVD/CD,TUNER,TV or
AUX) and start playback (if necessary),
0
Start recording on the external recording device.
Note;
- Refer to the owner's manual of the connected
equipment for details.
40