Yamaha CINEMASTATION NX-C300 - Manual (Page 33)

DVD Setup Menu Options
This setup is carried out via the TV, enabling you to
customize the DVD receiver to suit your particular
requirements.
General Setup menu
O
In DVD/CD mode, press SET UP,
0 Press -< ► to select the ‘General Setup’ icon.
© Press ENTER (OK) to confirm.
О
In ‘GENERAL SETUP PAGE’, press AT to highlight
[DISC LOCK], then press ►,
UNLOCK
Select this to unlock the disc and allow future
playback.
LOCK
Select this to block playback of the current disc.
Subsequent access to a locked disc requires a six­
digit password. The default password is ‘000 000’
(see “Changing the password” on page 34).
GEfJERAL SETUP PAGE
0 Press AT to select a setting and press ENTER
(OK) to confirm.
nSD LANGUAfiE
Selecting DVD-Audio/Video mode
O
In ‘GENERAL SETUP PAGE’, presss AT to highlight
[DVD-AUDIO], then press ►.
DVD-AUDIO MODE
Select this for normal playback,
DVD-VIDEO MODE
Select this to playback the contents of the DVD-
Video.
0
Press AT to select a setting, then press ENTER
(OK) to confirm your selection.
Notes:
- The DVD-AUDIO indicator lights up when a DVD-
Audio disc is playing.
-When you select DVD-VIDEO MODE, the DVD-
AUDIO indicator goes out.
Locking/Unlocking discs for viewing
Not all discs are rated or coded by the
manufucturer of the disc. You can prevent playback
of a specific disc by locking the disc. You can lock
up to 40 discs on this unit.
Programming disc tracks (except
for Picture CD/MP3/SA-CD discs)
You can playback the contents of a disc in the
order you want by programming the tracks to be
played.You can store up to 20 tracks,
Program;Track (except for Picture CD/MP3/
WMA/DivX®)
O Press PROG on the remote control.
OR
In‘GENERAL SETUP PAGE’, press AT to highlight
[PROGRAM], then press ► to select [FTS],
0
Press ENTER (OK) to confirm.
To program your favorite tracks/chapters
0
Use the numeric keypad (0-9) to enter a valid
track/chapter number.
TIPS: To return to the previous menu, press ■
To dear the menu, press SET UP.
29