Connecting external av components, Connecting avcr or cassette deck, Viewing and iistening to piayback – Yamaha CINEMASTATION NX-C300 User Manual
Page 20: Using thevcr for recording dvd piayback, Viewing and listening to playback, Using thevcrfor recording dvd playback, Connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Connecting external
AV components
If you connect external AV equipment such as aVCR, cassette deck or digital audio component to the
following AV jacks on the DVD receiver, you can enjoy those AV sources with the DVD receiver. Also, you can
record AV sources played on the DVD receiver using the recording equipment.This section provides some
examples of other AV equipment connections, For information on your AV equipment, refer to the manual for
it.
Connecting aVCR or Cassette Deck
Viewing and iistening to piayback
O
Connect theVCR or cassette deck to theTV as
shown.
0 Connect the DVD receiver’s AUX IN to the
AUDIO OUT jacks on theVCR or cassette deck.
Before starting operation, press AUX to select
“Ru-'i''RiJRLuLj)” in order to activate the input
source,
Using theVCR for recording DVD
piayback
Some DVDs are copy-protected. You cannot
record or dub protected discs using aVCR.
O Connect the DVD receiver’s S VIDEO output to
the S-VIDEO IN jack on theVCR.
O Connect the DVD receiver’s LINE OUT to the
AUDIO IN jacks on theVCR.
This will allow you to make analog stereo (two
channels, right and left) recordings.
16