Connecting atv, Using s-video output, Using the composite video output – Yamaha CINEMASTATION NX-C300 User Manual
Page 17: Using s-video output 3, Connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Connecting aTV
IMPORTANT!
- You only need to make one video
connection from the foliowing options,
depending on the capabilities of your TV.
- Connect the DVD receiver directly to the
TV.
Note:
- To hear the TV channels through this
DVD
receiver,
use the audio cables (white/red - not supplied) to
connect TV IN jacks to the corresponding AUDIO
OUT jacks on the TV.
Using S-video output
S-(separate)video connections achieve a clearer
picture than composite video connections, Use an
S-video cable (not supplied) to connect the DVD
receiver’s S VIDEO output to athe S-video input
jack (orY/C or S-VHS jack) on the TV
Using the composite video output
• Use a composite video cable (yellow -supplied) to
connect the DVD receiver’s VIDEO output to the
video input jack (orA/V InA^ideo In/Composite/
Baseband jack) on the TV.
13