Panasonic SC-AK57 - Manual (Page 36)

Enid^ng souhd wfh bdtB^^
¿OGiCYDOifir rao LOG/g
Press [□□, PRO LOGIC].
The PRO LOGIC] lamp lights.
Adjust the volume of each speaker.
Sit in the normal listening position and make the adjustments
with the remote control.
( 1 ) Hold down [SHIFT] and press [CH SELECT].
A test signal is output.
The speaker outputting the test signal is displayed while
the test is running.
L: Front speaker (Left)
C: Center speaker
R: Front speaker (Right)
S: Surround speakers
( 2 ) Press [VOLUME (- or +)].
Set the volume to the normal listening level.
The following steps are for setting the output level of the front
speakers and the other speakers to the same listening level.
@ Press [CH SELECT],
Select the speaker channel to be adjusted.
® Press [A, UP] or [▼, DOWN],
Adjust the output level.
UP: Increases the output level
DOWN: Decreases the output level
Repeat steps (|) and 0 to adjust the level accordingly.
To stop the test signal
Hold down [SHIFT] and press [CH SELECT] again.
To playback a DOLBY PRO LOGIC source
Press [□□, PRO LOGIC].
The [□□, PRO LOGIC] lamp lights.
Playback the source.
To turn off the DOLBY PRO LOGIC systems
Press [DO, PRO LOGIC].
The [DO, PRO LOGIC] lamp goes out.
Reference;
Add audio effects to improve the surround effect. pages 72, 74}
Manufactured under license from Dolby Laboratories
Licensing Corporation.
DOLBY, the doubie-D symbol □□ and “PRO LOGIC” are
trademarks of Dolby Laboratories Licensing Corporation.