Panasonic SC-AK57 - Manual (Page 19)

listening to compact dises
by remote control only
.i? c r V 0 0 0
^ L. JL/ , i- J
® Indicates program mode
You can program up to 24 tracks.
Press [CD].
Ensure CD is stopped.
Press [PROGRAM].
Press [DISC].
£
I (within 10 seconds or so)
Press [1]-[5] to select the disc you want.
iS Press the numeric button to select the desired
track.
Repeat steps 0-0 until you have programmed the desired
track(s).
Press [►/! 8/ a ].
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] In the stop mode.
Programmed contents wiii be saved in memory.
Pressing [■] will cancel program play, but it will also erase the en­
tire program.
To select a two-digit track
Press [>io] and then the two numbers you want.
When “CD FULL” appears El
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
You can do the following during program mode EH
• Check program contents.
Press or [►►/►►!].
Everytime you press one of the buttons, the track and program
No. are shown on the display.
•Add to the program.
Repeat steps Q through 0,
•Cancel entries.
From the last
programmed track
Press [CANCEL],
A specified track
only
Select the track with [M^/-*^] or
[►►/►►1], and press [CANCEL] within
3 seconds.
All tracks Press [■].
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If you turned off your program with [PROGRAM], you can play it
again as explained below.
1, Press [PROGRAM].
2. Press [►/II/ a ],
if you program a track not on your CDs
The track is initially programmed, but during program play, the play­
er wilt skip that track and will continue playing from the next pro­
grammed item.