Preparation, Hold down [shift] and press [aux1/2, Adjust the volume of each speaker – Panasonic SC-AK57 User Manual
Page 35: Reference, L£-p, B l h, E d s, Mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6CH
DIsatETE INPUT
mode
Milldj AUX1/2
a
B L H
T (W n M T
± l^i U t
IS
VOLUME
@
CH SELECT
¿¡X“
) / r~( I
f' U L
U O -J V
I t_J
Lf »/
a :
D
d
'J:
s
^ a
L£-P
- E d S
E
d]
Preparation:
If you have connected a subw/oofer (not included), press and hold
[S.WOOFER] for about 2 seconds so “SUB W ON" is shown on the
display.
Hold down [SHIFT] and press [AUX1/2].
The [6CH DISCRETE INPUT] lamp lights.
Adjust the volume of each speaker.
Sit in the normal listening position and make the adjustments
with the remote control.
® Output the test signal from the DVD player (not in
cluded).
Set the channel level to 0 dB on the DVD player, and ad
just the channel level on this system.
CD
Press (VOLUME (- or -i-)].
Set the volume to the norma! listening level.
The following steps are for setting the output level of the front
speakers and the other speakers to approximately the same
level.
@ Press [CH SELECT].
Select the speaker channel to be adjusted.
L: Front speaker (Left)
R: Front speaker (Right)
C; Center speaker
RS: Surround speaker (Right)
LS: Surround speaker (Left)
SW: Subwoofer
® Press
[A, UP] or [T.DOWN].
Adjust the output level
UP: increases the ou^ut level
DOWN: Decreases the output level
Repeat steps (5) and @ to adjust the level accordingly.
Reference:
Add audio effects to improve the surround effect. (^ pages 72, 74)
m
You cannot record sound when [6CH DISCRETE INPUT] is se
lected.
To record from DVDs, reconnect the DVD player (MIXED OUT) to
AUX1 or 2 terminal on this unit.