N press [power] to turn the unit on, Press [clock/timer] to select “clock, Press [clock/t9mer] to finish setting the time – Panasonic SC-AK57 User Manual
Page 13: Displaying the clock, Setting the time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the time
This is a 24-hour display clock.
The example in the figure shows how to set the time for 16:25
{4:25 p.m.).
n Press [POWER] to turn the unit on.
^ Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
CLOCKS© PLAY->©REC
—Previous display-«—I
{within 5 seconds or so)
Press [TUNE/TIME ADJ (v or
a
)] to set the
present time.
^ Press [CLOCK/T9MER] to finish setting the
time.
The display will return to whatever was displayed before you
set the time.
Displaying the clock
When the unit is off
When ECO mode is off;
The clock is displayed constantly.
When ECO mode is on;
Press [-DISPLAY/-DEM01.
The clock is displayed for about 5 seconds and then the display
goes blank again.
When the unit is on
Press [CLOCKTriMER] so “CLOCK” is shown.
The clock is shown for about 5 seconds then the previous display is
restored.