N pfess [3d ai eq] to adjust the surround level, Adjust the sound quality, To release the equalizer – Panasonic SC-AK57 User Manual
Page 30: Lilhh
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Varying the sound quality with
thè acoustic image (ÀI) equalizer
( 3 D A I E O )
It is possible to use the acoustic image equalizer (Al EQ) together
with the surround effect to create your own sound effect.
The Al EQ equalizer uses the SOFT, SHARP, HEAVY and LIGHT
sound
quality
coordinates
to
achieve
subtle
sound quality settings
with ease.
n Pfess [3D Ai EQ] to adjust the surround level.
Everytime you press the button;
Al EQ^3D AI1^3D A12
t____________________ I
Adjust the sound quality.
¡3)
^>
direction:
SOFT-SHARP
setting
©it
direction:
LIGHT-HEAVY
setting
Repeat steps © and © to set the desired sound quality.
The original display is restored on the display panel in about
5 seconds.
To release the equalizer
Turn [SOUND CONTROL JOG] to select “FLAT'.
lilHH
•The sound quality setting is stored automatically. It is recalled
when “Al EQ’* is next selected.
•“3D Air and “3D A12" cannot be used while the karaoke effects
are in use.
•Ait recordings are performed at the flat setting even if an alterna
tive sound quality setting has been selected.