Panasonic PV-V4621 - Manual (Page 36)

Copying Your Tapes (Dubbing)
Connection
VCH
Front ol VCR
VOEOINi (.-АШ
О О О
(Video In Terminal on the
front of VCR is available)
^ Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on Recording VCR. To
monitor the dubbing, also connect a TV as shown,
© Connect “L” and “R” AUDIO OUT terminals on Playing VCR to "L" and “R” AUDIO IN
terminals on Recording VCR.
In place of a Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit’s Audio/Video outputs to the Recording VCR.
1
Playing (Source) VCR
Insert pre-recorded tape.
Recording (Editing) VCR
Insert blank tape with record tab.
Press INPUT to set VCR Input mode to LINE1 for
Video Input (Rear) or to LINE2 for Video Input
(Front). (See “Selecting the Input Mode” below.)
Press PLAY, men PAUSE/SLOW
immediately to enter PLAY/PAUSE mode. Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.
The operation of steps 4 and 5 must be done on both
playing and recording VCRs at the same time.
Press PLAY to start dubbing.
Playing VCR starts playback. Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.
Press STOP to stop dubbing. Press STOP to stop dubbing.
To Monitor Dubbing on Your TV
1 Turn your TV on and tuna to the Recording
VCR channel (CH3 or CH4).
2
Set the VCR/ TV Selector on the Recording
VCR to “VCR."
Dubbing tapes protected with Copy Guard will
have poor quality results.
Selecting the Input Mode
Methodi: Press INPUT repeatedly.
ChannelNumber<">LINEI <->LINE2
Method2: PressCH A/V, Displaywill change as below.
C 1 *-*2~*-»'3* -V
(CABLE) (TV) J
or 69-*-^
• “LI" or “L2" lights on Multi-Function Display
(about 4 sec.) when LINEI or LINE2 is selected.
* LINEI : For rear audio/video connection.
LINE2: For front audio/video connection.
^Caution: Unauthorized exchanging artd/or copying ol copyrighted recordings may bo copyright intringenwnt^
36
For'assistance, please call ; 1-800-211-PANA(7262) or send e-mail to : [email protected]