Panasonic PV-V4621 - Manual (Page 14)

Playback a Tape
PLAY
FF
STOP
Playback using VCR controls
"I Insert a tape.
2
Press PLAY.
Tr _ _ •' ''
pj
Multi Function Display
Press STOP/EJECT to stop
and/ or eject tape.
| n ^Ready Check List
□ All connections are made (pg. 8, 10, 24).
□ TV and VCR are plugged in.
□ TV is on and tuned to CH3, 4, or VIDEO.
□ Remote is in VCR mode, (Press VCR)
1
2
Insert a tape,
• VCR power comes on.
“VCR" lights on Multi Function Display.
Press PLAY*
to play tape,
• If tape has no ree. tab (pg. 4), auto play begins.
Special Features During Play
Forward/ Reverse scene search
-*> Press FF or REW.
-> Press again or PLAY to release.
Still (Freeze) picture
-> Press PAUSE/SLOW.
--> Press PLAY to release.
Frame by Frame picture
--> Press PAUSE/SLOW in Still mode.
--> Press PLAY to release.
Slow Motion picture
--> Hold down PAUSE/SLOW in Still mode,
-> Press PLAY to release.
These features work best in SP or SLP
mode,
• The sound will be muted.
• To reduce picture noise, see “Manual
Tracking Control" on page 37.
• After the VCR is in Still or Slow mode for 3
minutes, it will switch to Stop mode
automatically to protect the tape and the
video head.
3 Press STOP
to slop tape.
Rapid Rewind/FF
■ Press REW or FF in Stop mode
to Rewind/ Fast Fonward tape.
• Rewind your tape in approximately one
minute when using a T-120 tape.
H Press EJECT on remote,
or STOP/EJECT on VCR to eject tape.
Remove loose or
peeling labels from tapes
to prevent tape jam.
14
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to ; [email protected]