Panasonic PV-V4621 - Manual (Page 30)

Tape Operation (continued)
Search System
For each recording, an invisible index mark is placed
on the tape. A program index and information are also
included for timer recordings. These marks are used to
access or scan recordings.
Index Search
1 1 Program End Search
Press SEARCH/
Locates end point of recording for
continuity.
<
Press SEARCH/ M/A SKIP
1 twice to display SEARCH in
Stop or Play mode.
1
SEARCH
INDEX 1 PROG.ENCTI M5ÏÎÈ' -- -----
1
ENTER INDEX NUMBER :1
USING 1-9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH :REW
NEXT iSEARCH WA SKIP
EXIT :STQP_ _ ■
M/A SKIP* to
display SEARCH in
Stop or Play mode.
INDEX search г
Press number keys
to select recording
number.
•To calculate
number, see below.
Press FF or REW
to start search.
INDEX SEARCH
Play begins at
search end. To
search forward or
back 1 index,
press FF or REW
while screen left
is displayed (10
sec.).
■ To Calculate Index Number
Example 1:
To go to rec. 2 from rec, 4, enter 3 and press REW.
I
1
I
2
I
3
I
4
I
5
I
6
I
7
Example 2:
To go to rec. 6 from rec 2, enter 4 and press FF.
NOTE: I indicates start points of each recording.
If Index Search is started very close to
an index mark, that index mark may not
be counted in the search.
_____ , SEAPCN..,_______
ГINDEX I PROG. END I MOVIE
SEARCH START ;FF
NEXT :SEARCH M/A SKIP
EXIT -STOP
Press FF
to start
PROGRAM
END SEARCH.
Examples of Program End Search.
Fjg..1
End Point
Ftq.2
HE
Program BLANK
End Point
Fiq.3
the current lim pQsluon
Press SEARCH button
Ш.
End Point
il
It search exceeds
a tew seconds in
BLANK area.
Upon locating end point,
->search continues 7 sec. past end point,
->tape rewinds to 10 sec. before end point,
-->tape plays to end point and stops.
• If Program End Search is started very
close to an index mark, that mark may be
skipped over.
• To cancel, press PLAY or STOP. 30
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic,coin