Record on a tape, Record using vcr controls, Press ch at, or number keys – Panasonic PV-V4621 User Manual
Page 15: Press speed, Press rec, Press stop, Select channels at vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Record on a Tape
'Important:
If a remote control button does not work
when pressed, press the VCR button on
the remote and try the button again.
STOP
Record using VCR controls
2
Select
1
Insert
Channel, a tape.
4
Press REC
to start
Recording.
I
il|t ___________ lili
LJii,
iCl " ""lit!
VCR/TV
Multi Function
Display
5 Press STOP/
EJECT to stop.
This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the IHH mark. Only tapes
tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.
[
n
^Ready Check List
□ All connections are made (pg. 8, 10, 24).
□ TV and VCR are plugged in.
□ TV is on and tuned to CH3, 4, or VIDEO.
□ Remote is in VCR mode. (Press VCR)
1
SPEED
CH A
CH ▼
Insert a tape with rec. tab (pg. 4).
• VCR powercomeson.
"VCR" lights on Multi Function Display.
Press CH
AT,
or number keys
to select channel.
• For “LINE" input, see pg. 36,
• For channels over 100, press 100 key then
press the remaining 2 digits.
Press SPEED
to select record speed (pg. 4).
SP = Standard Play LP = Long Play
SLP = Super Long Play
• Speedappears on-screen and on Multi Function Display.
Press REC
to start record.
• To edit out unwanted scenes, press PAUSE/
SLOW to pause, and again to resume recording.
Press STOP
to stop record.
One Touch Recording (record in progress),
• VCR shuts off after preset record length.
"> each press of REC adds 30 min. to
record length up to 4 hours.
Record one station, watch another,
—> press VCR/TV (“VCR" goes out on Multi
Function Display),
—> select channels at TV (recording
continues).
Watching one channel and
recording another is NOT
possible when using a Cable
Box or a Satellite Receiver.
Select channels at VCR,
• Other channels cannot be viewed during
recording.
"> press VCR/TV (“VCR” lights on Multi
Function Display),
-> select channels at VCR.
After 5 min. in Pause mode, VCR stops to
protect tape and video head.
15