beautypg.com

D rec/otr, 0 ii (pause/still), S-video in (av3) – Panasonic NV-HS950AM User Manual

Page 5: Phones, Video in (av3), 0 mic, 0 av3 selector, 0 standby indicator, 0 audio dub indicator, 0 insert indicator

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

c
o

To select the required programme position (TV

station).

These buttons can also be used for tracking

adjustment and vertical locking adjustment.
See page 9.

(D REC/OTR

To start a recording.

For One-Touch Recording (OTR).

0

II (PAUSE/STILL)

In the stop mode: Still picture (Jog/Shuttle mode).
During playback:
•By pressing:

Still picture. “QD” is lit.

(Jog/Shuttle mode).

During recording: Interrupts recording.

■ (STOP)

To stop any playback or recording.

► (PLAY)

To start playback. “[>” is lit.

For the repeat playback function.

S-VIDEO IN (AV3)
To connect the S-Video cable to a movie camera or
to another VCR that has a S-Video output socket.

• If the S-Video cable is connected, other video input

(AV3) is automatically switched off.

0

0

0

PHONES

To connect stereo headphones.

VIDEO IN (AV3)

To connect the video cable to a movie camera or to

another VCR.

0

MIC

To connect the microphone for recording. Once

connected, this socket has priority.

© SYNC/8mm

To connect the synchro connection cord {VW-K10E/
VW-K1E) to a movie camera or another VCR
equipped with synchronized editing capability.
To connect a movie camera or another VCR
equipped with LANC socket for One-Touch-Editing.

0

AV3 Selector

When Recording via the AV3 sockets on the front

panel or rear panel, set this switch to FRONT or

REAR.

0

Standby Indicator

This indicator is lit when the VCR is turned off or the

VCR is timer recording standby mode.

0

AUDIO DUB Indicator

This indicator is lit when the audio dubbing is

performed.

0

INSERT Indicator

This indicator is lit when the insert editing is

performed.

0

CVC Indicator

This indicator is lit when the power is ON.

0

Display

0

TIMER REC

To turn the timer recording function on and off.

ID is lit or not lit.

Once operating timer recording function, the normal
VCR operation is not possible unless this button is set
to off.

© COUNTER RESET

To reset the tape counter (elapsed time) to “0:00.00”.

•The tape counter is automatically reset to “0:00.00"

when a video cassette is inserted.

0 AUDIO DUB

To set up the VCR for audio dubbing.

0 INSERT

To set up the VCR for insert editing.

0 3DDNR

ON:

Using the 3D DNR function, playback is
performed in the state which achieves
optimum picture quality in light of
characteristics of a tape.

•The 3D DNR indicator is lit.
•This control should normally be left in the

ON position.

•The 3D DNR function does not work during

NTSC playback.

OFF: Turn off the 3D DNR function.

•The 3D DNR indicator is not lit.

0 Jog Dial

To locate any desired frame with utmost precision.

0 Shuttle Ring

In the stop mode: To rewind or fast forward the tape.
In the playback mode:

To search picture backward or

forward.

In the still playback mode:

To adjust playback speed

backward or forward.

In the rewind or fast fonward mode:

To obtain high speed picture.

O
O)

CD

Q