Panasonic NV-HS950AM - Manual (Page 11)

TV OPERATION
Refer to page 25.
34 POWER (TV)
To switch the TV from on to standby mode or vice
versa, in standby mode, the TV is stili connected to
the mains.
•With some TV models, it may only be possible to
switch the TV to standby mode using this button. In
this case, use TV/AV or \/ /s (TV) to switch the TV
on.
35 Numeric Buttons
Selects programme positions (1 -99) of the TV.
Ensure that VCR/TV switch is set to TV.
36 TV/AV
To seiect the TV input,
37 ^
Adjusts the volume of the TV.
38 V ^ (TV)
To select the required programme position (TV
station) of the TV.
39 PRESET
To set the remote controller for operation of the TV.
40 OFF
Sets the remote controller for operation of the TV.
Power Source for the Remote Controller
The remote controller is powered by 2 “AA”, “UM3” or “R6”
size batteries. The life of the batteries is about one year,
although this depends on the frequency of use.
Precautions for Battery Replacement
• Load the new batteries with their polarity (© and ©)
aligned correctly.
• Do not apply heat to the batteries, or an internal
short-circuit may occur.
• If you do not intend to use the remote controller for a
long period of time, remove the batteries and store them
in a cool and dry place.
• Remove spent batteries immediately and dispose of
them.
• Do not use an old and a new battery together, and never
use an alkaline battery with a manganese battery.
Installing the Batteries
c
.o
c
o
CO
q)
Q
11