Panasonic NV-HS950AM - Manual (Page 28)

other Playback Functions
To change the Playback Speed
1 Press 11 (PAUSE/STILL) on the VCR or
JOG/SHUTTLE on the remote controller.
2 Rotate Shuttle Ring.
Backward Forward
To locate the Desired Picture Exactly
1 Press 11 (PAUSE/STILL) on the VCR or
JOG/SHUTTLE on the remote controller.
Forward
To obtain High Speed Picture during
Fast Forward or Rewind
Keep ►► (FAST FORWARD) pressed during fast forward.
Keep ◄◄ (REWIND) pressed during rewind.
•The same operation can also be performed by turning
the Shuttle Ring on the VCR.
To playback the Recorded Part
Repeatedly
Keep > (PLAY) pressed for 5 seconds or more.
“R” appears on the On Screen display.
Beginning End of
of Tape Recorded Part
TT.l M rr I
Repeat Playback'
Control Signal
Interruption
(at least 5 sec.)
PLAY
c
:
t
REWIND
• Press □ (STOP) to release from Repeat Playback mode.
To return to a Specified Scene
1 Press RESET to set the counter to 0:00.00.
RESET
O
2 After playback, press ZERO STOP in the stop mode.
•The tape will be rewound or fast forwarded to 0:00.00
approximately.
ZERO STOP
O
Notes:
•Audio reproduction of linear (conventionally recorded)
tapes will be monaural when played back on the FM
Hi“Fi video recorders.
•Cue, review or slow playback will be automatically
released after 10 minutes, and still playback after
5 minutes.
• In LP mode only:
1
.
2,
During any playback mode other than normal
playback, the picture may have some noise bars, the
colour may be unstable, or a black and white picture
may appear.
When playing back a tape which was recorded on
another VCR, it may be necessary to adjust the
Tracking Control. In some cases the picture quality
may still be inferior. This is due to limitation of format.
28