Panasonic NV-HS950AM - Manual (Page 15)

Connection to a Decoder
Aerial
O)
.C
£
Cl)
CO
Notes:
• If the TV set is provided with an RGB-compatible
connector, connect the 21 -pin AV cable from the VCR to
this connector. Use the fully-wired 21 -pin scart cable for
connecting the TV set and VCR and for connecting the
VCR and decoder.
•Set the RF output channel of the VCR to “—” (RF OFF)
when the VCR is connected to the TV via the 21-pin
scart cable. See the bottom section on page 16.
•When the decoder is connected to the AV2 socket, AV2
Connection must first be set to DECODER.
(See page 23.)
AV LINK
With this button the connected colour TV set can be
switched from TV mode to VCR mode (vice versa) when it
is connected by means of 21 -pin scart cable.
This makes a variety of functions possible, such as
simultaneous recording and viewing when a Pay TV
decoder or a satellite receiver has been connected.
VCR mode (VCR indicator lights):
To enjoy sound and pictures from the VCR.
•When MENU is pressed and the OSD (On Screen
Display) screen is displayed, the unit also automatically
switches to VCR mode.
However, if the unit is originally in TV mode, the VCR
indicator is not displayed.
•The unit also automatically switches to VCR mode when
playback is started. However, the unit cannot be
returned to TV mode during playback.
TV mode (VCR indicator goes off):
To watch another programme on the TV while recording
on the VCR.
•Select the programme to be watched using the TV set’s
tuner.
•The sound and pictures of a different channel are
received by the VCR.
VCR TVeet
Power On
VCR mode AV input selected
TV mode
Input from TV set’s
tuner*
Power Off —
Input from TV set’s
tuner
*When the VCR is set to the TV mode and the Pay TV
channel is selected, the signals will still be scrambled
even when Pay TV is selected by the TV set’s tuner. At a
time like this, either set the VCR to the VCR mode or
switch the TV set’s input signals to AV input.
15