Panasonic NV-HS950AM - Manual (Page 43)

Before Requesting Service
Before requesting service, check the following points once again.
MESSAGE lilllliiti CAUSE
This action is not possible
before time and date
are set
G-CODE, number button
and then TRANSMIT are
pressed when date and time
are not set. Set date and time.
Please insert
video tape!
REC/OTR, > (PLAY), ►►
(FAST FORWARD), ◄◄
(REWIND), INSERT or
AUDIO DUB is pressed
when no cassette in the VCR. Insert a video cassette.
Please use tape with
recording tab intact!
REC/OTR, TIMER REC,
INSERT or AUDIO DUB is
pressed without tab of
Cassette. Use a cassette with tab.
No timer recording
programmes to be done!
TIMER REC was pressed
even though nothing has
been programmed.
Programme the timer recording.
Please put VCR
into stop mode first!
G-CODE was pressed during
a tape operation. Set the VCR to the stop mode.
DEW FORMED IN THE VCR. Dew has formed. Wait until the message disappears.
•Other messages besides these may appear. Follow the instructions in the message.
Self Test Indication
This VCR has a self-diagnosis and display function. If the VCR detects trouble during installation or during use, the following
indications automatically appear in the VCR display. Indications are displayed in the form of a single English letter plus two
numbers such as [H01].
INDICATION CAUSE ^WÉDVÍ,,"
U 1 0 Dew has formed. Wait until the indication disappears.
H □ □ Some trouble has occurred.
(Numbers following H and F
differ according to the status
of the VCR.)
Consult your dealer for further advice.
FDD
c
.Q.
(U
3:
4S